Home > News Center > company

News Center

Related news

No search results found!

What should you pay attention to when choosing a custom manufacturer for non standard project lightings?
2018-12-03 15:59:23

For star-rated hotels, the selection of non standard project lightings is different from that of other occasions.


The light source used in general star hotels has a life expectancy of about 2,000 to 4,000 hours. Therefore, the lamp will require a lot of light sources to be replaced in 10 years. The number of star-rated hotel lamps is over 10,000, so the replacement of the light source is also involving a huge amount of human resources, so the flexibility of the lamp is another consideration. The ideal luminaire selection is to load and unload the light source without the need for a fixed (positioning) component that pulls the luminaire. In addition to saving replacement time, it also provides positive protection for interior decoration.

non standard project lighting

Durability, general star hotel lighting, a small renovation for about five years, a major renovation for about ten years. In other words, the life of the luminaire needs to be less than ten years or more to meet the requirements of a star hotel. Because the general small maintenance does not replace the lamps, the scope of human resources involved is too large. This means that in the selection of the luminaire, the quality of the luminaire's heat and pressure, including the reflector cup, the heat sink and the fixing (positioning) components, is very important.


How to collect the light source of the hotel engineering lamps, the elasticity of the projection of the lamps, the expandability of the accessories, etc., all affect the selection of lamps. Especially in terms of the expandability of accessories, it is very careful to consider the "projection angle", "color/tone correction", "glare prevention", "accurate projection/illumination", etc. Some of these accessories are used to create an overall atmosphere.


Detailing, this includes all aspects of the fixture itself. Take the general ceiling light as an example, its spray quality (such as metal, the quality of the surface layer), the smoothness of the reflector (such as frosted reflector, uniformity of sandblasting), when After the ceiling is installed in the ceiling, we need to pay attention to the details such as the tightness of the ceiling (gypsum board/wood veneer) (whether there is light leakage). Another point, you need to mention, in addition to the hardware (lamps), the installation workers (process) is also very important, the decoration should be well ensured that the lamps are installed in the correct installation method.


Zhongshan Jako Lighting & Electrical Appliance Co., Ltd.

Email: davicao@jakolighting.com

Zip/Postal Code: 528478

Website: www.jako-lighting.com

Address: Yongxing Industrial Zone, Henglan 

Sales D1: +86 133 8176 0651

Town, Zhongshan, Guangdong, China

Sales D2: +86 133 7189 0289 

Factory tel: +86 (0760) 8761 9920; 8768 2939

Site Navigation

Home                  Projects

About us             Customization

Culture                Contact

News